Friday, August 3, 2012

North American emission control area comes into effect on 1 August 2012


The North American Emission Control Area (ECA), under the International Convention for the Prevention of Pollution from Ships (MARPOL), comes into effect from 1 August 2012, bringing in stricter controls on emissions of sulphur oxides (SOx), nitrogen oxides (NOx) and particulate matter for ships trading off the coasts of Canada, the United States and the French overseas collectivity of Saint-Pierre and Miquelon. 
 
Amendments to MARPOL Annex VI (Regulations for the prevention of air pollution from ships) to establish the North American ECA entered into force on 1 August 2011, with a 12-month period before becoming effective. 
There are now three designated ECAs in effect globally, the other two being SOx ECAs in the Baltic Sea area and the North Sea area.
 
A fourth area, the United States Caribbean Sea ECA, covering certain waters adjacent to the coasts of Puerto Rico and the United States Virgin Islands, was designated under MARPOL amendments adopted in July 2011, with expected entry into force on 1 January 2013, with the new ECA taking effect 12 months later on 1 January 2014.
 
Coordinates for the North American ECA 
Coordinates for the North American ECA can be found in Resolution MEPC.190(60)
http://www.imo.org/blast/blastDataHelper.asp?data_id=28815&filename=190(60).pdf 
 
ECA emissions limits
Within ECAS, the SOx content of fuel oil (expressed in terms of % m/m – that is, by weight) must be no more than 1.00% m/m; falling to 0.10% m/m on and after 1 January 2015.
 
This compares to 3.50% m/m outside an ECA, falling to 0.50% m/m on and after 1 January 2020. This date could be deferred to 1 January 2025, depending on the outcome of a review, to be completed by 2018, as to the availability of compliant fuel oil.
 
In practice, this means that, within an ECA, ships must burn fuel oil of a lower SOx content. Alternatively, the ship may use any “fitting, material, appliance or apparatus or other procedures, alternative fuel oils, or compliance methods”, which are at least as effective in terms of emissions reductions, as approved by the Party to MARPOL Annex VI. 
 
With regard to NOx emissions, marine diesel engines installed on a ship constructed on or after 1 January 2011 must comply with the “Tier II” standard set out in regulation 13 of MARPOL Annex VI. Marine diesel engines installed on a ship constructed on or after 1 January 2016 will be required to comply with the more stringent Tier III NOx standard, when operated in a designated NOx ECA. 
 
Further information
Further information and guidance is available from the United States Environmental Protection Agency’s website for Ocean Vessels and Large Ships: http://www.epa.gov/otaq/oceanvessels.htm#north-american.

Sunday, July 15, 2012

International Code for the Application of Fire Test Procedures (2010 FTP Code) mandatory from 1 July 2012


International Code for the Application of Fire Test Procedures (2010 FTP Code) mandatory from 1 July 2012
Amendments to the International Convention for the Safety of Life at Sea (SOLAS) to make mandatory the International Code for the Application of Fire Test Procedures (2010 FTP Code) came into force on 1 July 2012, thereby enhancing the fire safety provisions onboard all ships.
 
The 2010 FTP Code provides the international requirements for laboratory testing,  type-approval and fire test procedures for products referenced under SOLAS chapter II-2 (which includes regulations on fire protection, fire detection and fire extinction).
 
The 2010 FTP Code includes the following: test for non-combustibility; test for smoke and toxicity; test for “A”, “B” and “F” class divisions; test for fire door control systems; test for surface flammability (surface materials and primary deck coverings); test for vertically supported textiles and films; test for upholstered furniture; test for bedding components; test for fire-restricting materials for high-speed craft; and test for fire-resisting divisions of high-speed craft.

It also includes annexes on products which may be installed without testing and/or approval and on fire protection materials and required approval test methods. 

Other amendments entering into force on 1 July 2012
Other amendments to international treaties which entered into force on 1 July 2012 include:
 
• amendments to SOLAS regulation V/18 to require annual testing of automatic identification systems (AIS);

• amendments to SOLAS regulation V/23 on pilot transfer arrangements, to update and to improve safety aspects of pilot transfer;

• amendments to safety certificates in the SOLAS appendix and SOLAS Protocol of 1988, relating to references to alternative design and arrangements;

• amendments to the International Convention for Safe Containers, 1972, to include addition of new paragraphs in Regulation 1 Safety Approval Plate, specifying the validity of and elements to be included in approved examination programmes; the addition of a new test for containers being approved for operation with one door removed; and the addition of a new Annex III Control and Verification, which provides specific control measures to enable authorized officers to assess the integrity of structurally sensitive components of containers and to help them decide whether a container is safe to continue in transportation or whether transport should be stopped until remedial action has been taken; and

• a new chapter 9 of the International Code for Fire Safety Systems (FSS Code), related to fixed fire detection and fire alarm systems